Site web de Sofiane KHELLADI

  • Augmenter la taille
  • Taille par défaut
  • Diminuer la taille

Production scientifique

Envoyer Imprimer PDF

1. Publications [Bibtex]

A. Advenced numerical methods using high order finite volume method for unstructured grid / Méthodes numériques avancées de type volumes finis d’ordre élevé sur maillages non-structurés

  1. Nogueira X., Colominas I., Cueto-Felgueroso L., Khelladi S., Navarrina F., Casteleiro M., 
    "Resolution of Computational Aeroacoustics problems on unstructured grids with a higher-order finite volume scheme",
    Journal of Computational and Applied Mathematics, vol. 234/7, pp.2089-2097, 2010 (online since 2009).
  2. Nogueira X., Colominas I., Cueto-Felgueroso L., Khelladi S., 
    "On the simulation of wave propagation with a higher-order finite volume scheme based on Reproducing Kernel Methods",
    Computer Methods in Applied Mechanics and Engineering
    , vol. 199, pp. 1471-1490, 2010.
  3. Nogueira X., Khelladi S., Cueto-Felgueroso L., Bakir F., Colominas I., Gomez H., 
    "Implicit Large-Eddy Simulation with a Moving Least Squares-based finite volume method",
    IOP Conf. Series : Materials Science and Engineering, vol. 10/ 012235, 2010.
  4. Khelladi S., Nogueira X., Bakir F., Colominas I., 
    "Toward a Higher-Order Unsteady Finite Volume Solver Based on Reproducing Kernel Particle Method",
    Computer Methods in Applied Mechanics and Engineering, vol. 200, pp. 2348-2362, 2011.
  5. Nogueira X., Khelladi S., Cueto-Felgueroso L., Colominas I., Paris J., Gomez H., 
    "High-resolution finite volume methods on unstructured grids for turbulence and aeroacoustics",
    Archives of Computational Methods in Engineering, vol. 18/3, pp 315-340, 2011.
  6. Chassaing J.-C., Nogueira X., Khelladi S., 
    "Moving Kriging reconstruction for high order finite volume computations of compressible Flows",
    Computer Methods in Applied Mechanics and Engineering
    , vol. 253, pp. 463-478, 2013.
  7. Chassaing J.C., Khelladi S., Nogueira X., 
    "Accuracy assessment of a high-order moving least squares finite volume method for compressible flows",
    Computers and Fluids
    , vol. 71, 41-53, 2013
  8. Ata R., Pavan S. Khelladi S., Toro E.F.,
    "A Weighted Average Flux (WAF) scheme applied to shallow water equations for real-life applications",
    Advances in Water Resources, Volume 62, Part A, pp. 155–172, 2013.
  9. Ramırez L., Nogueira X., Khelladi S., Chassaing J.-C., Colominas I., 
    "A new higher-order finite volume method based on Moving Least Squares for the resolution of the incompressible Navier-Stokes equations on unstructured grids",
    Computer Methods in Applied Mechanics and Engineering
    , vol. 278, pp. 883–901, 2014. 
  10. Ramirez L., Foulquié Ch., Nogueira X., Khelladi S., Chassaing J.-C., Colominas I.
    "New High-Resolution-Preserving Sliding mesh Techniques for Higher-order Finite Volume Schemes"
    Computers and Fluids, vol. 118, pp. 114–130, 2015.
  11. Nogueira X., Ramirez L., Khelladi S., Chassaing J.-C., Colominas I.
    "A high-order density-based finite volume method for the computation of all-speed flows"
    Computer Methods in Applied Mechanics and Engineering, vol. 298, pp 229–251, 2016.
  12. L. Ramı́rez, X. Nogueira, P. Ouro, F. Navarrina, S. Khelladi, I. Colominas,
    "A higher-order Chimera method for finite volume schemes",
    Archives of Computational Methods in Engineering
    , accepted for publication in 2017

B. Multiphase flows with and without transfers / Écoulements multiphasiques avec et sans transferts

  1. Campos-Amezcua R., Khelladi S., Bakir F., Czerwiec Z.M., Sarraf C., Rey R., 
    "Numerical Analysis of Unsteady Cavitating Flow in an Axial Inducer",
    Journal of Power and Energy
    , vol. 224/2, pp. 223-238, 2010.
  2. Asgarpour M., Bakir F., Khelladi S., Khavandi A., Tcharkhtchi A., 
    "Characterization and modeling of sintering of polymer particles",
    Journal of Applied Polymer Science
    , vol. 119/5, pp. 2784-2792, 2011 (online since 2010).
  3. Asgarpour M., Bakir F., Khelladi S., Khavandi A., Tcharkhtchi A., 
    "3D Model for Powder Compact Densification in Rotational Molding",
    Journal of Polymer Engineering and Science
    , vol. 52/9, pp. 2033-2040, 2012.
  4. Ravelet F., Bakir F., Khelladi S., Rey R., 
    "Experimental study of hydraulic transport of large particles in horizontal pipes",
    Experimental Thermal and Fluid Science, Vol. 45, pp. 187-197, 2013.
  5. Rivière S., Khelladi S., Farzaneh S., Bakir F., Tcharkhtchi A., 
    "Simulation of Polymer Flow using Smoothed Particle Hydrodynamics Method",
    Polymer Engineering & Science, vol. 52 (12), pp. 2509-2518, 2013.
  6. Zaaraoui A., Ravelet F., Margnat F., Khelladi S., 
    "A High Accuracy Volume Flow Rate Measurement Using Vortex Counting",
    Flow Measurement and Instrumentation, Vol. 33, pp. 138–144, 2013. 
  7. Campos–Amezcua R., Khelladi S.,  Mazur-Czerwiec Z., Bakir F.,Campos-Amezcua A., Rey R., 
    "Numerical and experimental study of the cavitating flow through an axial inducer considering the tip clearance",
    Journal of Power and Energy
    , Vol. 227 (8), pp. 858-868, 2013.
  8. Campos–Amezcua R., Bakir F., Campos-Amezcua A., Khelladi S., Palacios M., Rey R., 
    "Numerical analysis of unsteady cavitating flow in an axial inducer",
    Applied Thermal Engineering, Volume 75, pp. 1302-1310, 2015 (online since 2014).
  9. Deligant M., Specklin M., Khelladi S. 
    "A Naturally Anti-Diffusive Compressible Two-Phase Kapila Model with Boundedness Preservation Coupled to a High Order Finite Volume Solver", Computers and Fluids, Vol. 114, Pages 265–273, 2015
  10. Hamidi A., Khelladi S., Illoul L., Shirinbayan M., Bakir F., Tcharkhtchi A. 
    "Implementation of Surface Tension force in Fluid Flow during Reactive Rotational Molding",
    International Journal of Material Forming, doi:10.1007/s12289-015-1217-z, 2015.
  11. Hamidi A., Farzaneh S., Nony F., Ortega Z., Khelladi S., Monzon M., Bakir F., Tcharkhtchi A. 
    "Modelling of sintering during rotational moulding of the thermoplastic polymers",
    International Journal of Material Forming, doi:10.1007/s12289-015-1239-6, 2015.
  12. Hamidi A., Khelladi S., Illoul L., Shirinbayan M., Bakir F., Tcharkhtchi A.
    "Modelling Surface Tension with Smoothed Particle Hydrodynamics in Reactive Rotational Moulding",
    Computers and Fluids, vol. 118, pp 191–203, 2015.
  13. Tomov P., Khelladi S., Ravelet F., Sarraf C., Bakir F., Vertenoeuil P.
    "Experimental study of aerated cavitation in a horizontal venturi nozzle",
    Experimental Thermal and Fluid Science
    , Vol. 70, pp 85–95, 2016.
  14. Zouaoui S., Djebouri H., Mohammedi K., Khelladi S., Ait Aider A.
    "Experimental study on the effects of big particles physical characteristics on the hydraulic transport inside a horizontal pipe"
    Chinese Journal of Chemical Engineering, Volume 24, Issue 2, February 2016, Pages 317–322
  15. B. Cherabi, A. Hamrani, I. Belaidi, S Khelladi, F. Bakir
    "An efficient reduced-order method with PGD for solving journal bearing hydrodynamic lubrication problems"
    Comptes Rendus Mécanique, Volume 344, Issue 10, October 2016, Pages 689–714

C. Aero-hydrodynamics and acoustics of subsonic turbomachines / Aéro-hydrodynamique et acoustique des turbomachines subsoniques

  1. Khelladi S., Kouidri S., Bakir F., Rey R. 
    "Flow Study in the Impeller-Diffuser Interface of a Vaned Centrifugal Fan",
    ASME Journal of Fluids Engineering, 127 , pp. 495, 502 - 2005.
  2. Khelladi S., Kouidri S., Bakir F., Rey R., 
    "Predicting Tonal Noise from a High Speed Vaned Centrifugal Fan",
    Journal of Sound and Vibration, vol. 313/1-2, pp. 113-133, 2008.
  3. Khelladi S., Kouidri S., Rey R., 
    "Isom’s Thickness Noise for Axial and Centrifugal Subsonic Fans",
    Journal of Sound and Vibration, vol. 313/1-2, pp. 1-6, 2008.
  4. Khelladi S., Sarraf C., Bakir F., Rey R., 
    "Study of a High Rotational Speed Shrouded Centrifugal Fan : Aerodynamics and Effects of shroud associated cavity on the Performance",
    Journal of Power and Energy, 224/5, pp. 691-700, 2010 (online since 2009).
  5. Khelladi S., Bakir F., 
    "A Consistency Test of Thickness and Loading Noise Codes Using Ffowcs Williams and Hawkings Equation",
    Advances in Acoustics and Vibrations, vol. 2010, Article ID 174361, 6 pages, 2010.
  6. Solis. M., Bakir F., Khelladi S., Noguera R., 
    "Numerical Study on Pressure Fluctuations Reduction in Centrifugal Pumps : Infuence of Radial Gap and Splitter Blades",
    ISRN Mechanical Engineering
    , vol 2011, Article ID 479594, 14 pages, 2011.
  7. Obikane Y., Khelladi S., 
    "Instability Problem of Turbo-Machines with Radial Distortion Problems",
    World Academy of Science, Engineering and Technology, vol. 77, pp. 1101-1103, 2011.
  8. Eleiwi F., Laleg-Kirati T.-M., Khelladi S., Bakir F., 
    "A Semi-Classical Signal Analysis Method for the Analysis of Turbomachinery Flow Unsteadiness",
    World Academy of Science, Engineering and Technology
    , vol. 59, pp. 215-218, 2011.
  9. Noura B., Dizène R., Khelladi S., 
    "A Numerical Simulation of Turbulence Flow around a Blade Profile of HAWT Rotor in Moving Pulse",
    Journal of Applied Fluid Mechanics, vol. 5/1, pp. 1-9, 2012.
  10. B. Noura, I. Dobrev, R. Dizène, F. Massouh, S. Khelladi, 
    "Experimental study of yawed inflow around horizontal wind turbine rotor",
    Journal of Power and Energy, vol. 226/5, pp. 664-673, 2012.
  11. Tannoury E., Khelladi S., Demory B., Henner M., Bakir F., 
    "Tonal Noise Prediction of an Automotive Engine Cooling Fan: Comparison between Analytical Models and Acoustic Analogy Results",
    Journal of Mechanics Engineering and Automation
    , Vol. 2, pp. 455-463, 2012.
  12. Tannoury E., Khelladi S., Demory B., Henner M., Bakir F. 
    "Influence of blade compactness and segmentation strategy on tonal noise prediction of an automotive engine cooling fan",
    Applied Acoustics, Vol. 74, Issue 5, pp. 782-787, 2013.
  13.  Noura B., Khelladi S., Dizène R., Bakir F.,
    "Numerical Simulation of Dynamic Stall and Surface Roughness of a Wind Turbine Blade Using a URANS Approach",
    J
    ournal of Power and Energy Systems, Vol.7, Issue 1, pp. 32-48 2013.
  14. Noura B., Dobrev I., Kerfah R., Massouh F., Khelladi S., 
    "Investigation of the wake rotor of Horizontal Axis Wind Turbines under Yawed Condition",
    Journal of Applied Fluid Mechanics, Vol. 9, No. 6, pp. 2695-2705, 2016
  15. Noura B, Dobrev I., Khelladi S., Masouh F., 
    "3D unsteady flow analysis around a rotor blade of horizontal axis wind turbine-Rutland 503",
    International Journal of Energy and Statistics, Vol. 04, No. 03, 1650013 (2016) 1650013
  16. T. Azzam, R. Paridaens, F. Ravelet, S. Khelladi, H. Oualli, F. Bakir,
    "Experimental investigation of an actively controlled automotive cooling fan using steady air injection in the leakage gap",
    Journal of Power and Energy, Vol. 231(1), pp. 59-67, 2017

2. Patents/Brevets

  1. V. Atim, B. , R. Yu, B. Popineau, Bakir F., Khelladi S.,
    "Séparateur de phase et procédé de séparation correspondant",
    Brevet RENALT, date de publication 20-09-2013, ref. FR2988013.
  2. K. Azzouz, S. Khelladi, F. Bakir, 
    "Fan system with Heat Transfer Function",
    Brevet VALEO, RFR1186, déposé le 11/2015
  3. K. Azzouz, S. Khelladi, F. Bakir, 
    "System integration of Fan system with Heat Transfer Function",
    Brevet VALEO,RFR1187, déposé le 11/2015

3. Chapters in books/reviews

  1. Tcharkhtchi A., Khelladi S., Rey R.,
    "Flow of Liquid Reactive Polymers During Rotational Moulding",
    Rotation, volume XIII, issue 1, pp. 45-47 , January - February 2004

  2. Rey R., Bois G., Bakir F., Khelladi S.
    "Turbomachines : calcul des écoulements incompressibles - Support théorique et simulation numérique ",
    Techniques de l'Ingénieur, Référence BM4220, Date de publication : 10 oct. 2009 [...].

  3. R. Campos-Amezcua, F. Bakir, Z. Mazur, S. Khelladi, A. Campos-Amezcua,
    "Numerical and experimental study of mass transfer through cavitation in turbomachinery",
    InTec, Mass Transfer/Book 3, ISBN 978-953-308-74-5

  4. S. Rivière, S. Khelladi, S. Farzaneh, F. Bakir, A. Tcharkhtchi, F. Nony, Ph. Mazabraud,
    Simulation de l’écoulement d’un liquide réactif au cours du rotomoulage,
    Choc Focus n°2 juillet 2011, La chimie CEA/DAM, pp. 28-29, 2011

  5. S. Khelladi, C. Sarraf, F. Bakir, R. Rey,
    "Aerodynamic and aeroacoustic study of a high rotational speed centrifugal fan",
    InTec, Aerodynamics, ISBN 979-953-307-395-7, 2012.

  6. Nogueira X., Khelladi S., Colominas I., Bakir F., Chassaing J.-C.,
    "On the use of Moving Least Squares for pressure discretization in low Mach number flows",
    Numerical Methods for Hyperbolic Equations Theory and Applications, CRC Press, 2012 accepted for publication.

  7. L. Ramírez, X. Nogueira, C. Foulquié, S. Khelladi, J.C. Chassaing, I. Colominas,
    "A MLS-based high-order-preserving sliding mesh technique with no intersections",
    Springer, CFD for Wind and Tidal Offshore Turbines, 150p, 2015.
  8. P. Tomov, S. Khelladi, C. Sarraf, F. Bakir, "Numerical Modeling of Aerated Cavita-
    tion Using Compressible Homogenious Equilibrium Model", Springer, Advances in
    Hydroinformatics, SymHydro 2014, accepted for publication in 2015
  9. E. Marechal, S. Khelladi, F. Ravelet, F. Bakir, "Towards numerical simulation of
    snow showersin jet-engine fuel systems", Springer, Advances in Hydroinformatics,
    SymHydro 2014, accepted accepted for publication in 2015
  10. L. Ramírez, X. Nogueira, S. Khelladi, J.C. Chassaing, I. Colominas,
    "A higher-order finite volume method with collocated grid arrangement for incompressible flows",
    Computational Methods and Experimental Measurements XVII, WIT Transactions on Modelling and Simulation, 564p, 2015
  11. A. Tcharkhtchi, F. Nony, S. Khelladi, J. Fitoussi, S. Farzaneh, "Epoxy/amine for composites reactive
    materials systems and their thermomechanical properties", Chapter: 13 of Book: Advances in
    Composites Manufacturing and Process Design,  Elsevier, ISBN : 9781782423072,  2015
  12. L. Ramírez, X. Nogueira, C. Foulquié, S. Khelladi, J.C. Chassaing, I. Colominas, "A Moving Least Squares-Based High-Order-Preserving
    Sliding Mesh Technique with No Intersections", Chapter 3, Book : CFD for Wind and Tidal Offshore Turbines, Chapter 3,
    Springer International Publishing, pp. 27-36, 2015

4. Communications

4.1 International communications

  1. Khelladi S.(*), Kouidri S., Bakir F., Rey R. "Optimization of 3D unsteady fluid flow in multistage centrifugal fan", ASME Fluids Engineering Forum - FEDSM04 - HT-FED2004-56792, Charlotte, USA.

  2. Khelladi S.(*), Kouidri S., Bakir F., Rey R. "A Numerical Study on the Aeroacoustics of a Vaned Centrifugal", ASME Fluids Engineering Summer Conferences - June 19-23, 2005, Houston, Texas, USA - FEDSM2005-77134.

  3. Khelladi S.(*), Kouidri S., Rey R. "Isom’s Thickness Noise Formula for Axial and Centrifugal Subsonic Fans", InterNoise 2007, 28-31 AUGUST 2007, ISTANBUL, TURKEY.

  4. Khelladi S., Cao R.. Noguera R.(*), S. Kouidri, F. Bakir, R. Rey, "Effects of Tip Clearance on the Performance and the Flow Field of a High Rotational Speed Centrifugal Fan", Proceedings of COBEM 2007, 19th International Congress of Mechanical Engineering November 5-9, 2007, Brasília, DF

  5. Campos-Amezcua R.(*), Bakir F., Khelladi S., Rey R., "Numerical Study of theUnsteady Cavitating Flow", 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery - February, 12-22, 2008, Honolulu, Hawaii.

  6. Nogueira X., Cueto-Felgueroso L., Colominas I., Khelladi S., Navarrina F., Casteleiro M., "A numerical approach based on Moving Least Squares approximations for the resolution of acoustic problems on unstructured grids", Advanced Computational Methods in Engineering (ACOMEN 2008), University of Liège, Belgium, 26-28 May 2008

  7. Khelladi S.(*), Bakir F., Rey R., "Validation of Thickness and Loading Noise Codes by Isom's Formula Applied to Subsonic Axial and Centrifugal Fans", Acoustics08, Paris, 2008, COUSTICS2008/584, J. Acoust. Soc. Am. 123, 3537 (2008)

  8. Khelladi S.(*), Nogueira X., Bakir F., Cueto-Felgueroso L., Colominas I., "Finite Volume Solvers and Moving Least Square Approximations for the Linearized Euler Equations on Unstructured Grids", Acoustics08, Paris, 2008, ACOUSTICS2008/589, J. Acoust. Soc. Am. 123, 3381 (2008)

  9. Asgarpour M.(*),Bakir F., Khelladi S., Tcharkhtchi A., "Particle sintering and migration of bubbles during rotational molding of aerodynamic parts", Rotomoulding, Thermoforming and Stretch-Blow Moulding, 11-13 March, Albi, France, 2009.

  10. Campos-Amezcua R.(*), Bakir F., Khelladi S., Rey R., "Numerical and Experimental Analysis of Cavitating Flow in an Axial Inducer with/without Tip-Clearence", 8th Europian Conference on Turbomachinery Fluid Dynamics and Thermodynamics, Graz, Austria, 23-27 March, pp. 183-195, 2009.

  11. Khelladi S.(*), El Hadhen H., Nogueira X., Bakir F., Ouadjaout M., "Toward a High Order Unsteady Finite Volume Solver Based on Moving Least Squares Approximation Method : Application to Aeroacoustic Problems", The IMACS World Congress on Computational and Applied Mathematics & Applications in Science and Engineering, August 3-5, 2009, Athens, GA, USA.

  12. Solis. M. (*), Bakir F., Khelladi S. , "Pressure Fluctuations Reduction in Centrifugal Pumps: Influence of Impeller Geometry and Radial Gap", ASME Fluids Engineering Division Meeting (FEDSM2009), August 2-6, 2009, Vail, Colorado, USA.

  13. Moon Y.J.(*), Kim H., Bae Y., Ravelet F., Khelladi S., Nouri H., Bakir F., "Prediction of axial fan noise by linearized perturbed compressible equations with large eddy simulation",
    THE JOINT 159TH MEETING OF THE ACOUSTICAL SOCIETY OF AMERICA/NOISE-CON 2010, J. Acoust. Soc. Am. Volume 127, Issue 3, pp. 1837-1837, 19–23 April 2010. Baltimore.

  14. Asgarpour M., Bakir F., Khelladi S., Tcharkhtchi A., “Sintering of polymer powders”, BYPOS 2010, Trencianske Teplice (Slovakia), 7-10 June 2010.

  15. Khelladi S.(*), Martin S., Nogueira X., Bakir F., "Higher- Order Preserving Methods for Unsteady Finite Volume Solvers Based on Reproducing Kernels: Application to Aeroacoustic Problems",
    AIAA-2010-3817, 16th AIAA/CEAS Aeroacoustics Conference, 7-9 june 2010 Stockholm, Sweden.

  16. Ravelet F., Khelladi S.(*), Nouri H., Bakir F., Kim H., Bae Y., Moon Y.J., "Study of the Aerodynamics/Aeroacoustics of an Axial- Flow Fan: Experimental Validation of a LES/LPCE/Brinkman Penalization Method", AIAA-2010-3869, 16th AIAA/CEAS Aeroacoustics Conference, 7-9 june 2010 Stockholm, Sweden.

  17. Nogueira X.(*), Khelladi S., Cueto-Felgueroso L., Bakir F., Colominas I., Gomez H., "Implicit Large-Eddy Simulation with a Moving Least Squares-based finite volume method",
    9th World Congress on Computational Mechanics, 19-23 July 2010, Sydney, Australia.

  18. Solis. M., Ravelet F., Bakir F., Khelladi S., "Experimental and numerical analysis of the flow inside a configuration including an axial pump and a tubular exchanger",
    3rd Joint US-European Fluids Engineering Summer Meeting, 22nd Symposium on Fluid Machinery, paper no FEDSM-ICNMM2010-30723, 1-5 August 2010, Montreal, Canada.
  19. S. Khelladi, X. Nogueira, H. El-Hadjen, I. Colominas, F. Bakir, M. Casteleiro, "Application of a high-order finite volume method to aeroacoustic problems of industrial interest",
    Mecánica Computacional, Volume XXIX. Number 35. Fluid Mechanics (D), Buenos Aires, Argentina, 15-18 Noviembre 2010.

  20. R. Campos-Amezcua, F. Bakir, S. Khelladi, L. Bergerat (*), Z. Mazur-Czerwiec, R. Rey, Numerical study of unsteady cavitating flow in a three-dimensional axial inducer, 9th EUROPEAN CONFERENCE ON TURBOMACHINERY, Fluid Dynamics and Thermodynamics, 21 - 25 March 2011, Istanbul, Turkey.

  21. E. Tannoury (*), B. Demory, M. henner, S. Khelladi, F. Bakir, Tonal Noise Prediction of an Automotive Engine Cooling Fan: ComParison Between Analatical Models and Acoustic Analogy Results, 9th EUROPEAN CONFERENCE ON TURBOMACHINERY, Fluid Dynamics and Thermodynamics, 21 - 25 March 2011, Istanbul, Turkey.

  22. L. Ramirez, X.Nogueira, S. Khelladi, J.C. Chassaing, I. Colominas, On the Use of Meshless Methods for the Development of High-Accurate Finite Volume Schemes, ECCOMAS, ADMOS 2011, International Conference on Adaptive Modeling and Simulation, 6-8 June, Paris, France.

  23. L. Ramirez, X.Nogueira, S. Khelladi, J.C. Chassaing, I. Colominas, NUEVAS FAMILIAS DE MÉTODOS DE ALTO ORDEN DE VOLÚMENES FINITOS OBTENIDAS MEDIANTE LA UTILIZACIÓN E DIFERENTES TÉCNICAS MESHLESS, ongresso CMNE 2011, 4 a 17 de Junho, Coimbra, Portugal, niversidade de Coimbra

  24. X. Nogueira, S. Khelladi, H. El Hadhen, L. Ramirez, I. Colominas, Métodos de volúmenes finitos con técnicas meshless de aproximación para la resolución de problemas de acústica en turbomáquinas", Congresso CMNE 2011, 4 a 17 de Junho, Coimbra, Portugal, niversidade de Coimbra

  25. X. Nogueira, S. Khelladi, I. Colominas, F. Bakir, On the use of Moving Least Squares for pressure discretization in low Mach number flows, Numerical Methods for Hyperbolic Equations: Theory an Applications, An international conference to honour Professor E.F. Toro, University of Santiago de Compostela, 4-8 july 2011, Spain

  26. M. Solis, S. Khelladi, I. Colominas, F. Bakir, “A new-high precision solver to predict pressure fluctuations in centrifugal pumps”, in Proceedings of the ASME-JSME-KSME Conference, p. 13, 2011.

  27. X. Nogueira, S. Khelladi, L. Cueto-Felgueroso, I. Colominas, “Compressible flow applications of a finite volume method based on Moving Least Squares”, 6th International Workshop Meshfree Methods for Partial Differential Equations, October 4-6, 2011, Bonn, Germany.

  28. I. Colominas, J.-C. Chassaing, S. Khelladi, L. Ramirez, X. Nogueira, “Meshless approximations for the development of high order finite volume methods”, 6th International Workshop Meshfree Methods for Partial Differential Equations, October 4-6, 2011, Bonn, Germany.

  29. E. Tannoury, B. Demory, M. henner, S. Khelladi, F. Bakir, "Blade segmentation strategy for tonal noise computation of low Mach axial fans", 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-14 February 27th - March 2nd, 2012, Honolulu, HI, USA.

  30. Kim H., Jo Y., Bai I.H., Moon Y. J., Ravelet F., Khelladi S., Bakir F., "3D Computation of Axial-flow Fan Noise by LPCE - Brinkman Penalization Method", FAN2012, International Conference on Fan Noise, Technology and Numerical Methods, 18-20 April 2012 Senlis, France.

  31. S. Khelladi, X. Nogueira, M. Solis, F. Bakir, I. Colominas and J. Mardjono, "A high-resolution preserving sliding-mesh approach based on meshless methods: application to acoustic propagation in presence of rotor/stator features", Acoustics 2012, Nantes, France, 23 - 27 April 2012, Joint meeting : 11th Congrès Français d'Acoustique and 2012 IOA annual meeting.

  32. L. Bergerat, S. Khelladi, F. Bakir, "Cavitation Modeling of Thermosensitive Fluids Using Compressible Phases Approach", Proceedings of the 8th International Symposium on Cavitation, CAV2012, August 14-16, 2012, Singapore.

  33. X. Nogueira, S. Khelladi, J.-C. Chassaing, I. Colominas, "On the computation of low Mach flows using density-based solvers", European Congress on Computational Mechanics ECCOMAS 2012, September 10-14, 2012, Viena, Austria.

  34. S. Parrang, J. Ojeda, S. Khelladi, M. Gabsi, "Aeroacoustic noise prediction for SRM", 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 8-10 April 2014, Manchester, UK.

  35. P. Tomov, S. Khelladi, C. Sarraf, F. Bakir, "Numerical Modeling of Aerated Cavitation using Compressible Homogeneous Equilibrium Model", SimHydro 2014, 11-14 Juin, Nice - Sophia Antipolis, France.

  36. E. Marechal, S. Khelladi, F. Ravelet, F. Bakir, "Towards numerical simulation of snow showersin jet-engine fuel systems", SimHydro 2014, 11-14 Juin, Nice - Sophia Antipolis, France.

4.2 National communications

  1. Tcharkhtchi A., Khelladi S., "Mécanique des écoulements lors du rotomoulage, Rotomoulage", ENSAM-Angers, mai 2003.

  2. Chinesta F., Perot E., Khelladi S., Tcharkhtchi A.,"Simulation du procédé du rotomoulage", Le Pole Européen de Plasturgie (PEP) à Bellignat, 17-18 juin 2003

  3. Tcharkhtchi A., Khelladi S., Rey R., "Optimisation des procédés, Rotomoulage, Thermoformage et Soufflage", Tours, 1-2 d´ecembre 2005.

  4. Atim V., Khelladi S., Bakir F., Yu R., "Moteur à combustion interne : stockage thermique pour la réduction des émission et de la consommation". CFM, Besançon, du 28 août au 02 septembre
    2011.

  5. Zaaraoui A., Khelladi S., "Débitmètre à effet vortex avec capteur à jauge de contraintes et mesure dans une section quadrangulaire". CFM, Besançon, du 28 août au 02 septembre 2011.

 

 

 

 

 

(*) speaker

Mise à jour le Lundi, 24 Avril 2017 08:19